Minimum order of N10,000* Shop now
Out of stock
Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson
Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson
Load image into Gallery viewer, Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson
Load image into Gallery viewer, Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson

Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson

Out of stock
Notify me when available
Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson
Ask a question

Ask a question

Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson
Local Delivery

Shipping info

Availability: Ships anywhere in Nigeria

Processing Time: Allow 1-2 business days processing time for your order to ship.

Oatmeal & Shea Butter Melt and Pour Soap Base by stephenson

Crystal OV

This new Crystal OS is a vegetable-based Melt and Pour Soap base, made using natural Oatmeal and nourishing Shea Butter. PEG free and paraben-free, this soap base gives a fantastic lather, and soothes and moisturizes with its combination of Oatmeal and Shea butter.

This new base has a superior suspending formulation so that any additives put into the soap won't sink to the bottom or float to the top! Unlike other soap bases, you won't need to keep mixing your soap as it cools, in order to keep your additives where you want them.

Glycerin, a natural emollient, is included to draw moisture from the air to benefit skin. It cleanses without stripping or upsetting the delicate natural pH balance necessary for soft, healthy looking skin. And, since we don't use animal oils, our soap rinses clean and leaves no soapy film behind. All our soap bases are produced with high-quality raw materials to form a luxurious lather and sparkling clarity.

Usage: A two-pound brick can make between 10 - 20 soaps, depending on the size of the soap you’re trying to make.

Enriched with Natural Shea Butter
High in Vitamin E, D & Provitamin A
Suspending formulation
Layers well
Low Colour
Mild sweet scent, and no need to scent
Fantastic lather

Caution: When making soaps it is good to remember that the Melt & Pour Bases contain water as part of the formula. So if they are left exposed to the atmosphere, the water will evaporate and the bar of soap will shrink. We would recommend fully wrapping the ENTIRE soap bar as soon as it is poured and cooled--this should minimize/eliminate any shrinkage.

Usage:A two-pound brick can produce between 10-20 soaps, depending on the intended size of the final soap.

Directions For Use:

Melt and pour soaps are pretty simple. You melt the base, add your color, add your chosen fragrance and other beautiful additives and pour in the mold. Voilà! you now have a hand made soap you can call your own! We have included the basic material that you will need in order to create your soaps, while the other material can easily be found in your kitchen.


Melt & Pour Soap Base Fragrance
Soap additive (if available) Alcohol in a spritzer (available in drugstores)



Double boiler or double boiler type (pot & aluminum bowl to put on top) Spatula

Stove Kitchen Knife Mixing bowls


1. Melting the soap base: start heating up the water in the double boiler. Always keep an eye in your stove for safety. Cut the soap base into smaller sizes with a kitchen knife. Place the cut soap in a double boiler pot and stir occasionally until melted.

Melting temperature:
130 F (54 C) – begins to melt 140 F (60 C) soap is fully melted

Note: do not go more than this temperature, as your soap will start to discolor and lose too much water.

Most people would use double boiler on stove top to melt the base for easier control of heat. Although you may use the microwave too, just make sure that you leave enough room in the bowl you’re using to melt the soap. And should you prefer to use microwave, heat for short periods such as 15 to 20 seconds, stir between each heating time until soap is completely melted.

Adding fragrance: once the soap is melted, pour into a glass bowl or measuring cup: once it’s cool enough to hold in your hand, you are ready to add the fragrance. When adding fragrance to the soap, stir well to evenly spread the aroma. It’s better to add fragrance before color. This will allow you to see the effect of the oils you added before adding any color. At times when using essential oil it gives a distinct color and might not require added colorant.

Recommended fragrance: in 16 ounces of soap (1 lb) you can add 1 to 3 teaspoons of fragrance (20 to 60 drops) or until you achieve the desired aroma.
This can be one or more scents but the total number of drops remains the same.

3. Adding color: add little by little the liquid color to the soap while stirring until you achieve the desired look that you wanted. If you want to make a clear base opaque, dilute a small quantity of titanium dioxide in water and add a tiny bit at a time to your base until you get the result you’re looking for.

4. Pouring into the molds: once you have added your fragrance and achieve the color you wanted, you are now ready to pour the melted soap into the molds. You may use a pouring pitcher or use the mixing bowl depending to what you are comfortable to use.

Pouring temperature is great if it’s at 135 F
Tip: once you pour the soap in the mold, spritz with alcohol to eliminate bubbles formed at the surface of the soap.

Tip: if you want multiple layers, spritz with alcohol between layers: alcohol is the glue that holds the layers together.

5. Un­molding your finished soap: it can take up to a couple of hours to harden the soap, depending on the size of the soap and the ambient temperature. Test if the soap is hard by lightly pressing the surface and if it’s solid you’re ready to un­mold. Turn the mold upside down and gently press on its bottom and the soap should pop right out. If it does not pop out most likely it’s not cool enough, leave it for an hour more. Sometime placing the soap in a freezer for 10 minutes will help it as well.

At Deo Organic we have developed a sophisticated software program that calculates the shipping costs on your order. Actual shipping charges are derived using a Konga, GIG, Sendbox, Fed-Ex, DHL shipping matrix that factors actual weight, or dimensional weight (Length x Width x Height) depending upon which is greater. We then apply the heavily discounted volume rate that we contract annually with Konga, GIG, Sendbox, Fed-Ex, DHL. The savings are passed on directly to you, and we do not charge any additional handling fees. Charges can be seen on-line before you finalize your order. There are no surprises!